- Description
- Related Files
- Discussion
AIO FC BetaFPV Matrix 1S Air Brushless (5 IN 1)
The flight control unit Matrix 1S Brushless Flight Controller was designed for beginners and occasional pilots, bringing higher resistance thanks to a stronger board. The absence of soldering makes it easy to use, making it an ideal choice for first-time users. This model is slightly heavier than the Air Brushless Flight Controller 5IN1 version, which is intended for advanced FPV pilots looking for more responsive and race-oriented performance.
Both versions, Matrix 1S Brushless FC and Air Brushless FC 5IN1, have been rigorously tested and meet competition level standards.
Specifications
Flight Control Unit (FC)
- MCU: STM32G473CEU6
- Gyroscope: ICM42688P
- Blackbox memory: 16 MB
- Sensor: Voltage and current
- BEC: 5V, max. 3A
-
UART:
- UART 1
- UART 2 (for VTX)
- UART 3 (for RX)
- UART 4
- BetaFlight OSD: AT7456E
- ESC: 5A continuous power
- RX: Serial ELRS 2.4GHz (V3.4.3)
- VTX: 5.8GHz, 48 channels, max. 400mW
- Firmware FC: Betaflight_4.5.0_BETAFPVG473
- USB port: SH1.0-4Pin
- Motor connector: JST1.25
- Battery connector: BT2.0
- Mounting hole size: 26mm x 26mm
- Weight: 3.92±0.1 g
Electronic Speed Controller (ESC)
- Power input: 1S only
- Current: 5A continuous, 8A peak
- ESC Firmware: A_X_5_96KHz_V0.19.hex for BB51 Bluejay Firmware
- Digital signal protocol: DShot300, DShot600
VTX
- Output power: 25/100/200/400/PIT
- Frequency: 5.8GHz, 48 channels, including Raceband: 5658~5917MHz
- Channel selection: SmartAudio2.0
- Modulation: FM
- Frequency control: PLL
- Harmonic distortion: Max. -50dBm
- Frequency stability: ±100 kHz (typical)
- Frequency accuracy: ±200 kHz (typical)
- Carrier channel error: ±1.5 dB
- Antenna connector: 50 Ω
- Operating temperature: -10℃~+80℃