
- Description
Stack Pilotix DIY Stack ELRS915 Kit (F405 FC + 60A ESC)
Pilotix DIY F460-stapel
1: Pilotix DIY F460 (F405 V3 + 3060 AM32) Stapel
-
F405 V3 Vluchtbesturing :
- Hoofdchip : STM32F405RGT6
- Gyroscoop : ICM42688
- Barometer : SPL06
- OSD : Ondersteund
- Zwarte doos : 16 MB/microSD
- Motorvermogen : 8 kanalen
- LED-lichtstrip : ondersteund
- Zoemer : Ondersteund
- Ontvangerprotocol : ELRS/CRSF/SBUS/Frsky/Futaba/Flysky/TBS Crossfire/DSMX
- Universele seriële poort : 5-kanaals optioneel
- Uitgangsvermogen : 5V/2,5A, 9V/3A
- USB-connector : Type-C
- DJI/Vista Digital Sky End : Ondersteund
- Camera schakelen : Ondersteund
- Sbus- en VTX-jumperschakeling : ondersteund
- 9V en VCC jumperschakeling : Ondersteund
- Gewicht : 9,6 g
- Buitenafmetingen : 36 mm x 36 mm
- Positie van de montagegaten : 30,5 mm x 30,5 mm
- Firmwarenaam : AOCODARCF405V3 / AOCODARCF405V3SD
-
3060 Elektronische controller (ESC) :
- Continue maximale stroom : 60A x4
- Maximale stroomsterkte : 70A x4
- Ingangsspanning : 3-6S Lipo
- Elektrisch distributieprotocol : Dshot300/Dshot600/PWM/Bi-directioneel Dshot
- MCU : AT32F421K8U7
- Ingebouwde stroommeter : Ondersteund
- ESC-telemetrie : ondersteund
- Firmware : AM32_AT32PB4_540_F421_2.12.hex
- Gewicht : 13,9 g
- Buitenafmetingen : 40 mm x 40,7 mm
- Positie van de montagegaten : M3 30,5 mm x 30,5 mm
2: Pilotix DIY ELRS915-ontvanger met 915-antenne
-
ELRS915-ontvanger :
- Frequentieband : 915 MHz
- Telemetrie-uitgangsvermogen : 17 dBm
- Ontvangerprotocol : CRSF/SBUS etc.
- Ingangsspanning : +5V DC
- PCB-afmetingen : 22 mm x 14 mm
- Gewicht : 1,3 g (zonder antenne)
- Firmware : BATAFPV SuperD 900MHz RX
- Aansluiting : 4-pins kabel
- Geschikt voor : Koppeling met ELRS915M-frequentie
- Dubbele antenne : zorgt voor een stabielere ontvangst en betere weerstand tegen interferentie, geschikt voor lange vluchten
-
Antenne T-vormig 915 :
- Afmetingen : 148 mm x 70 mm
3: Inhoud van het pakket:
- F405 V3 Besturingseenheid (met 4 gelaste MR300 mannelijke aansluitingen voor motor/stroomkabel/1000uF vaste elektrolytische condensator *1)
- 3060 AM32 60A Elektronische regelaar (ESC)
- 8PIN SH1.0-verbindingskabel X1
- ELRS915-ontvanger (met gelaste 4-pins kabel)
- T-vormige 915-antenne
- Motorconnector met MR30 vrouwelijk x4
- 3-pins camerakabel X1
- 6-pins kabel voor VTX X1
- M3 Metalen Studs X4
- Matrix X8
- M3 Schokdempers X8