{"product_id":"stack-flashhobby-f4-fc-f55a-esc","title":"Stack FlashHobby F4 FC + F55A ESC","description":"   \u003cstyle\u003e body { font-family: Arial, sans-serif; font-size: 14px; } for { font-family: Arial, monospace;  white-space: pre-wrap; } .highlight { font-weight: bold;}\u003c\/style\u003e\u003cpre\u003e\nFlashHobby F4 FC + F55A ESC\n\nSpecifications:\n\nProduct name: FLASH HOBBY F405 30.5x30.5 Flight Controller\nMCU: STM32F405\nIMU (Gyro): ICM42688\nUSB port type: Type-C\nBarometer: BMP280\nOSD chip: BetaFlight OSD with AT7456E chip\nDJI air unit connection method: Two ways are supported: 6-pin connector or direct soldering.\nDJI 6-pin connector: Supported. Fully compatible with DJI O3\/RunCam Link\/Caddx Vista\/DJI Air Unit V1, no need to change any cable.\nBlack box: 16M Black Box\nCurrent sensor input: Supported. For 50A ESC, set Scale = 180 and Offset = 0.\nPower input: 3S - 6S Lipo (via ESC 8-PIN connector)\n5V BEC output: 5 grouse 5V output, total current load is 3A\n9V output: 3 groups 9V output, the total current load is 2.5A\n3.3V output: 1 group 3.3V output, the maximum current is 300mA\nESC signal: M1 - M4\nUART: 6 sets (UART2 UART5, UART3), UART6 (Dedicated for SBUS), UART4 (Reserved for ESC telemetry), UART1 (Reserved for VTX data setting)\nSbs: Debug on UART6 channel\nESC telemetry: UART R4 (UART4)\nI2C: Supported. SDA \u0026amp; SCL pads on the front. Used for magnetometer.\nLED Pad: Supported. LED, 5V and GND pads on the bottom of the front. Used for WS2812 LED controlled by Betaflight firmware.\nBuzzer: supported, 5V, BZ pads for 5V buzzer\nBOOT Button: Supported.\n [AND]. Press and hold the BOOT button and power on the FC at the same time, this will put the FC into DFU mode, this is for flashing the firmware when the FC freezes.\n [B]. When the FC is powered on and in standby mode, the BOOT button can be used to control the LED strips connected to the LED1-LED4 connectors on the bottom. By default, short press the BOOT button to toggle the LED display mode. Long press the BOOT button to switch between SpeedyBee-LED mode and BF-LED mode. In BF-LED mode, all LED1-LED4 strips will be controlled by Betaflight firmware.\nSupported flight controller firmware: BetaFlight (default),\nTarget firmware name: STM32F405\nMounting: 30.5 x 30.5mm (hole diameter 4mm)\nDimension: 37 (L) x 37 (W) x 6.6 (H) mm\nWeight: 7.5g\n\nProduct name: FLASH HOBBY BLS 60A 30.5x30.5 4in1 ESC\nFirmware: BLS 16.7\nPC Configurator download link: https:\/\/esc-configurator.com\/\nContinuous current: 60A * 4\nExplosive current: 65A (5 seconds)\nTVS protection diode: Yes\nExternal capacitor: 35V560uF Low ESR capacitor (included)\nESC protocol: DSHOT300\/600\nPower: 3-6S LiPo\nOutput power: VBAT\nCurrent Sensor: Support (Scale=180 Offset=0)\nESC telemetry: Not supported\nMounting: 30.5 x 30.5mm (hole diameter 4mm)\nDimensions: 42.3 (D) * 37 (W) * 6.2 mm (H)\nWeight: 12g\n\nThe package includes:\n1x FlashHobby F4 FC + F55A ESC\n\u003c\/pre\u003e","brand":"BSS","offers":[{"title":"Default Title","offer_id":51924253475152,"sku":"3472","price":70.17,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0904\/4479\/2144\/files\/14346-5_14346-4-stack-flashhobby-f4-fc-f55a-esc.jpg?v=1755825862","url":"https:\/\/bsswebshop.com\/products\/stack-flashhobby-f4-fc-f55a-esc","provider":"BSS Webshop","version":"1.0","type":"link"}