{"product_id":"stack-tbs-lucid-h7-8s-60a","title":"Stack TBS Lucid H7 8S 60A","description":"\u003cp\u003eStack TBS Lucid H7 8S 60A\u003c\/p\u003e\u003cp\u003eThe TBS Lucid H7 Stack 8S 60A is a powerful 4-in-1 stack combining an ultra-fast H7 flight controller with a high-current 8S-compatible ESC — ideal for high-voltage FPV builds, freestyle and cinematic drones.\u003c\/p\u003e\u003cp\u003eFeatures: - High-performance flight control with dual ICM42688 gyro sensors for precise stabilization. - Integrated SPI OSD and barometer for clean telemetry and altitude awareness. - Full-stack compatibility with modern firmware (AM32 for ESC, ArduPilot, Betaflight, INAV for FC). - Gorilla-mount design keeps electronics secure and airflow optimized without center screw interference\u003c\/p\u003e\u003cp\u003eFC Specifications: MCU: STM32H743VIH6 running at 480MHz, with 1MB RAM and 2MB Flash. Gyro: ICM42688 x 2 (duo gyro) OSD Chip: AT7456E (SPI2) Barometer: Infineon DPS310 connected via I2C2. PWM Outputs: 13 channels, including a dedicated “LED” pad. Blackbox (BB): Data logging equipped with a MicroSD card slot (SDIO) UARTs: 7 total (1, 2, 3, 4, 6, 7, 8) signal inversion ready I2C Buses: 2 available. CAN Bus: 1 available. Analog Inputs: 6 ADC channels (VBAT, Current, RSSI, Analog AirSpeed, Vbat2, Cur2). LED Indicators: 3 LEDs (Blue, Green for FC Status, Red for 3.3V Power). Breakout: SPI3 breakout available. USB Interface: Type-C connector (USB 2.0 standard). JST Connectors: 1x JST-SH1.0 8-pin (Vbat\/ G\/ Curr\/ Rx8\/ S1\/ S2\/ S3\/ S4) 1x JST-GH1.25 4-pin (5V\/ CAN-H\/ CAN-L\/ Ground). Dual Camera Input: Switchable inputs for two cameras. Power Control: Switch for filtered 5V\/Vbat output power. DJI FPV OSD: Compatible via any spare UART port.\u003c\/p\u003e\u003cp\u003eESC Specifications: ESC software: AlkaMotors32 (AM32) ESC target: tbslu8s4in1 Rated current: 60A x 4, 60 seconds Peak Current: 85A x 4, 30 seconds Propellers: Up to 11\", over 7\" requires good airflow Input: 3-8S Lipo Protocol: Bi-directional Dshot 300\/600, KISS ESC Telemetry ESC Current port: Yes BEC: No Size: 50x42mm Mounting: Gorilla-mount (39.5x16.0mm) \u0026amp; 30.5x30.5 mm or brackets for 20x20 mm Weight: 17.58g, 22g incl. brackets\u003c\/p\u003e\u003cp\u003ePackage includes: 1x FC TBS Lucid H7 1x ESC 8S 4-in-1 ESC Mounting hardware including Gorilla brackets for frame compatibility\u003c\/p\u003e","brand":"BSS Drones","offers":[{"title":"Default Title","offer_id":52766959370576,"sku":"7568","price":133.04,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0904\/4479\/2144\/files\/21950-1_stack-tbs-lucid-h7-8s-60a.png?v=1772637715","url":"https:\/\/bsswebshop.com\/nl\/products\/stack-tbs-lucid-h7-8s-60a","provider":"BSS Webshop","version":"1.0","type":"link"}